Dear G90 drivers.
We are pleased to inform you that a wireless software update is being conducted to enhance the usability of the Digital Key 2-related features.
Update start and completion times may vary for each vehicle.
■ Update release date : May. 25, 2023 ~
■ Applicable vehicle: G90
■ Update highlight
- An update has been made to trigger an alert sound only when both the smart key and digital key are not recognized when closing the doors with the engine running.
- After remotely starting the vehicle, an alert sound will only be triggered if both the smart key and digital key are not recognized inside the vehicle. This improvement allows for vehicle operation after recognition.
※ Please note that due to the radio frequency(RF) environment or vehicle conditions, there may be temporary difficulties in recognizing the digital key, even if it is present inside the vehicle. Additionally, digital key recognition is limited to situations where NFC-enabled smartphones are placed on a wireless charger.
※ During the OTA software update, there might be temporary disruptions in the functioning of the locking features via smartphone key, NFC card key, or door buttons. (In such cases, you can control the door lock/unlock function by pressing the lock/unlock button on the smart key or within the vehicle control menu of the MY GENESIS app.)
※ After the completion of the regular infotainment system update in May, the corresponding features will be activated.
※ Offline updating in a Hi-Tech Center or Blue Hands may incur additional charges.
[Notes on over-the-air (OTA) update]
1. If the battery has been removed and then attached, you can update the vehicle after turning off the ignition, disconnecting the power from the additionally installed dash cam, etc., and parking for more than 4 hours.
2. If any product is connected to the vehicle OBD terminal, the update function will not work due to interference in the vehicle internal communication.
After disconnecting the device from the vehicle OBD terminal, turn on the engine and wait for at least 5 minutes, then turn off the engine.
(Do not connect any device to the OBD terminal during the wireless update.)
[Inquiry] Genesis Customer Center 080-700-6000